Blog

We record the bottlenecks of the pressure-vessel design and ordering floor.

AUTONEST VCCompatibility · setup

VC not showing up in your CAD? — Why LISP registration got stuck, and why we moved off it

VC sometimes did not appear because LISP registration differs per CAD and version — so we moved the drawing out and VC now writes the DXF itself. Today you open it from the desktop and press [Calculate]; the drawing is a DXF that opens in any CAD.

2026-10-29
AUTONEST VCFree tool · Pipe ISO

Pipe isometrics on your phone in minutes — free cut lengths, weld list, DXF and STEP

Draw a pipe isometric in your phone browser. Arrows and lengths give cut lengths, a 6 m random-length plan, weld list, DXF and 3D STEP — plus co-view by link. Free.

2026-10-25
AUTONEST VCFree tool · File viewer

How to open a STEP file without CAD — and DWG too: open, measure, edit and co-view by link, no install

A STEP from a supplier, a DWG from a fabricator — open them in the browser without CAD. Measure diameters, center and face distances, make quick DWG/DXF edits and save as DXF (original kept), and co-view by link with up to 8 people. Works on phones.

2026-10-24
AUTONEST VCQuote · Cost

Where does a pressure vessel quote build up — 21 steps of a 400 L jacketed tank

A quote shows only the total, but it builds up across 21 steps from specs to site qualification. See the cost added at each step on an animated 400 L jacketed tank.

2026-10-17
AUTONEST VCField · Piping

Sanitary fittings — what one drawing really takes, and free elbow DXF/STEP downloads

Drawing one 1.5S sanitary elbow takes numbers like OD 38.1, centre-to-end 50 / 70 / 85 and ferrule 50.5. The time goes into finding numbers and matching end types, not drawing lines. Also: ferrule end = weld end + ferrule length, and free tools that give the table, DXF, STEP and ISO symbols once you pick a size.

2026-10-16
AUTONEST VCField · Installation

Vessel weight, early — the numbers for the building load check and for transport and installation

Weight is most useful early. The building load and load cells get the larger of full and operating weights; transport, lifting and installation get the empty weight. Round towards heavy.

2026-10-15
AUTONEST VCField · Inspection

Korea Energy Agency pressure vessel inspection documents — report, drawing and weld map in one run

The core of a Korea Energy Agency inspection package: strength calculation report, drawing and weld map — from one input. Applicability, application, review and signing stay human work; the agency decides.

2026-10-15
AUTONEST VCFIELD · CHOOSING TOOLS

Choosing pressure vessel design software? Ask an AI yourself

People ask an AI before they buy. Do the same for design software: a question you can paste as it is, the example answer we received on 14 Oct 2026, and how adding conditions changes the answer. Answers vary by question, time and model — whatever you get, verify it with the free trial.

2026-10-14
AUTONEST VCField · Heads

Head blank diameter — a table, not a formula

Blank diameters and the plate they fit for heads from 600 to 2,000 inner diameter, at 6 mm, straight flange 30, allowance 10. At 1,000: 10% dished φ1,196, 2:1 ellipsoidal φ1,256 — and that gap changes the plate size.

2026-10-09
AUTONEST VCField · Ordering

One tank — how many plates do you buy?

Inner diameter 1200, length 1600, 6T. Unrolled, the shell is 3,789 × 1,600 — 4 plates of 1,219 × 2,438 or 3 of 1,524 × 3,048. Heads are counted by the blank diameter, φ1,421. The order to count in, and three common slips.

2026-10-08
AUTONEST VCField · Quotes

Only one designer — keeping quote drawings moving

With only one designer and quotes backing up, tank drawings come out one of three ways — send them out, adapt an old drawing, or have one person do it all. All three stall at the same spot. Keep setting conditions and the final check with people, and take the repetition in between off their desk.

2026-10-08
AUTONEST VCDesign principles · AI

If AI does everything, why a dedicated program? — What happened when a general AI designed a pressure vessel

Looking things up one at a time, AI beats people. But design is a chain. Given the same 3-tonne jacketed tank, a general AI got three of six thicknesses wrong, two of them on the thin side. Not a knowledge problem but a data and chain problem — which is why lookups go to AI and repeated compound work goes to a dedicated program.

2026-10-07
AUTONEST VCCase study · Head type

2:1 heads cost more to form — but you buy up to 40% less plate

A 2:1 ellipsoidal head costs more to form, but at the same pressure it can be one or two steps thinner. We ran 30 cases — 3 pressures × 5 capacities — and set head thickness and plate weight side by side.

2026-10-07
AUTONEST VCCase study · Size search

Same 1-ton tank, one step thinner head

Inner diameter down 15 mm, length down 30 mm — bottom head 10T to 8T, material −14.5 kg, capacity unchanged. Thickness comes in steps, and some sizes sit right on top of one; with 45 combinations even for one ton, nobody had time to check by hand. When it works and when it doesn't, from actual runs.

2026-10-06
AUTONEST VCABOUT · PRICING

Why an annual fee instead of a one-time purchase? — Before you compare prices with other software

AUTONEST VC is an annual license, not a one-time purchase, because of updates. Also: why putting it on the same line as mass-market software prices does not make a fair comparison, and what to compare instead.

2026-10-04
AUTONEST VCFEATURES · ORDER PREP

For a cutting plan, one Excel file is enough

How to cut from the stock plate is part of the calculation result. Layout, parts list and calculation basis for every plate — in most cases, one Excel file covers material preparation and the cutting plan.

2026-09-26
AUTONEST VCANNOUNCEMENT · ENGLISH

English strength reports — pick the report language, same numbers in every language

Choose Korean, English or 中文 under Report language on the top row and press [Calculate] — the report, cutting layout and weight/heat sheets come out in that language. The calculation basis, numbers and judgments are the same in every language.

2026-09-25
AUTONEST VCOUTPUT · THE ORIGINAL

Why the report original is an editable Excel file — a living report whose judgment lines are redrawn every run

The calculation happens once, but it lands in more than one place. That is why the report original is handed over as Excel with the formulas still live. The red line on the external-pressure chart, the seam lengths on the weld map and the judgment text are not template pictures either — they are rebuilt from this case's values every run.

2026-09-23
AUTONEST VCDeliverables · The report

One page shows you the whole thing

A report runs past thirty pages, yet the page a reviewer opens first is one. How conditions, thickness and verdicts were fitted onto that page, and why seven tables still read the same way.

2026-09-12
AUTONEST VCDesign principles · Handoff

What becomes more necessary as robots multiply

Machines execute; they do not decide. The cheaper the hands get, the more the bottleneck moves to whoever settles what to make. Why automation is decomposing work rather than technology, and how design results are exported for machines to read.

2026-09-12
AUTONEST VCDesign principles · Verification

No program calculates infinity

No program handles every value. The difference is whether the boundary was declared, and whether the inside was actually tested. Fix the input range first and that range becomes the test range.

2026-09-11
AUTONEST VCCost · Carbon

Steel you did not buy is carbon that was never made

Less material means lower cost. But behind every kilogram of steel sits the carbon emitted making it. Steel never bought is carbon never made — thickness optimisation and stock-plate matching fill the cost sheet and the carbon sheet together. CBAM and ESG included.

2026-09-10
AUTONESTABOUT · THE NAME

Why AUTONEST — the reason we brought drawing and calculation into one nest

AUTO means automatic, NEST means nest, and VC stands for Vessel Calculation. From how we started connecting drawing and calculation, which had always run apart, to the name and logo — gathering scattered design work into one nest, automatically.

2026-09-10
AUTONEST VCDesign · Automation

Head type: pick one, skip the formula hunt

Each head type (10% torispherical, 2:1 ellipsoidal, flat cover) uses a different formula, so a rarely-used head means hunting for the right one. In AUTONEST VC you pick the type and thickness, tangent length, external pressure and the drawing all follow automatically.

2026-09-08
AUTONEST VCJacket · Automation

Jacket clearance: back-calculated, so the bottleneck is gone — and widening it re-runs the strength calculation

A jacketed vessel needs a gap — clearance — between the inner vessel and the jacket. Laid out from the inner diameter, the shell and head differ in wall thickness, so the gap to the jacket disagrees on the shell side and the head side. AUTONEST VC back-calculates that value and fits it automatically — and when you widen the clearance, it re-runs the strength and external-pressure calculation, raising the shell thickness or trimming the gap.

2026-09-08
AUTONEST VCMaterials · Scope

Materials are data — we add the ones you need

Two stainless materials today (A240-304, A240-316L). A material enters as data — allowable stress and an external-pressure B-curve — so we add the ones you need by adding data, on demand.

2026-09-08
AUTONEST VCOUTPUT · SUBMISSION

Edit the report in Excel, submit it as PDF

When the calculation is done you need two things — an original you can edit, and a fixed copy you can submit as-is. Right where it's made: the Excel original (for editing) and the submission PDF, in one pass. No manual print-to-PDF, and the original untouched.

2026-09-07
AUTONESTVISION · DIRECTION

Is AUTONEST the end of the road?

Most work happens inside CAD, Excel, Word and PowerPoint. Not changing the tools you use, just clearing the repetition inside them — the same engine plugs in there. AUTONEST is the roof many automations nest under, and VC is its first nest.

2026-09-07
AUTONEST VCNOZZLES · CHOICE

Add a pad, or step the plate up

Three ways to make up the strength an opening takes away — a reinforcing pad, a thicker nozzle neck, or a thicker parent plate. All three pass the check; what differs is the kind of cost, and that is decided by the shop.

2026-09-08
AUTONEST VCCAPACITY · SIZING

"A three-tonne one" does not contain any dimensions

An enquiry arrives as a capacity; a drawing needs a diameter and a length. Infinitely many pairs satisfy the same three tonnes — the working ratio and the L/D ratio fill that gap, and the drawing carries a recomputed W.V.

2026-09-08
AUTONEST VCFEATURES · JACKET

The jacket rises to the working level by itself

Leave the jacket-length cell blank and the working volume gives the liquid level, and the jacket top is set there. Enter a value and it wins; impossible values are adjusted and reported. Give room for a hinge or clamp and that gap is respected before the level.

2026-09-09
AUTONEST VCSETTINGS · PEACE OF MIND

Broke a setting? Put it back.

Company-specific values are edited as tables in the [Data settings] tab. Wrong-format lines are blocked before saving, backups are kept on save and on calculation, and [Restore DB] takes you back to a chosen point. Your values survive updates and reinstalls.

2026-09-09
AUTONEST VCFEATURES · FLANGES

Flanges: pick the type, the rest follows

Choose five things - type, shape, connection, gasket, groove - and the engine keeps one of 13 section pictures, rounds the thickness up from a standard list, computes the bolt count and draws it at the same thickness. Past the list it shows NOT OK.

2026-09-09
AUTONESTFIELD · PERSPECTIVE

Automation is not a choice. It is survival — and it is not about cutting headcount

Large firms assign someone to design automation; a small shop cannot put a person on it, yet the customer's yardstick is identical. Which leaves one route: use something already built. And automation is not about cutting headcount — what goes is the repetition, and the time that comes back goes to judgment, quality and customers.

2026-09-08
AUTONEST VCINSPECTION · QUOTING

How many RT films? You know before the drawing exists

Film counts come from seam lengths, and seams come from the plate layout — so the number always arrived after the drawing, and sales had to guess. It now comes out of the run that settles the thickness, per seam, with the counting rule published.

2026-09-08
AUTONEST VCRELIABILITY · TRUST

Even when our server has a bad day, your calculation doesn't stop

The calculation engine, drawing logic and spec databases all live on your PC. The server only checks your license. Lose the connection, or have our server stumble, and you still have 7 days from your last check-in.

2026-09-21
AUTONEST VCDELIVERABLES · FILENAMES

The filename alone tells you what happened

The prefix says how it was calculated, the suffix says what actually cut material. A tag is added only when there was a real saving, not just when the feature ran.

2026-09-15
AUTONEST VCMAINTENANCE · TRUST

Nobody wants an update when they're busy

Changed files only, cancellable, and swapped in only when every file has arrived. Stop it halfway and zero files have been replaced. Your own settings folder is never touched.

2026-09-08
AUTONEST VCRESPONSE · TRUST

When a result looks wrong, here's how we respond

Every piece of software has bugs. What sets a tool apart is how fast they are caught. When you hit an odd value: what to check, how to report it from the app via [Account] → Report a bug / suggestion, and how the fix comes back.

2026-09-07
AUTONEST VCCOST · JUDGMENT

The plate got heavier, yet the total went down

The material grew by 3.7 kg, yet the total cost went down. Cost has two branches — the money you buy with (material) and the money you build with (cutting · welding · inspection) — but a quote usually lumps them by ratio and looks at one. Three points where measuring both by the same ruler flips the answer.

2026-09-06
AUTONEST VCDESIGN PRINCIPLE · BOUNDARY

Why we didn't automate everything — the places we chose not to put into code

Enter the conditions and thickness, drawings and material list all come out — yet there are places we deliberately left non-automatic. Design conditions, non-standard fittings, each company's drawing format, the final judgment, and rarely-triggered design rules such as the half-diameter limit on head openings — why we left them.

2026-09-05
AUTONEST VCPROVEN · CROSS-CHECK

A 3-ton jacketed tank: drawing checked against the report — a real design run from a few lines of input

Input: a few lines of capacity, material, pressure, temperature, manhole and nozzle — no dimensions or thicknesses. We measured the resulting report's lengths, thicknesses and external-pressure design length directly on the drawing of a 3-ton double-jacketed tank, including why the top and bottom heads differ and where the external-pressure judgment comes from.

2026-08-30
AUTONEST VCDOMAIN · EXTERNAL PRESSURE

Internal pressure: seconds. External pressure: 5 minutes.

Internal pressure pushing out is one formula and done. What really ties people up is the pressure pressing in from outside — vacuum and jacket pressure. What that back-and-forth on the A/B charts really is, and how to end it automatically.

2026-08-19
AUTONEST VCSAFETY · INSPECTION

Corrosion allowance — the few mm you can't see that change the thickness

A few mm never drawn as a line on the drawing change the whole wall thickness. Why it's easy to miss, and why in external pressure especially it becomes a quiet safety accident — and how to remove the place it can slip through.

2026-08-19
Free toolsREGULATION · PRESSURE VESSELS

Class 1 vs Class 2 pressure vessels — where does mine fall?

A pressure vessel becomes legally 'subject to inspection' once it passes certain conditions (pressure × volume). The line that separates Class 1 from Class 2, and why, once subject to inspection, the strength calculation becomes the gate before fabrication.

2026-08-17
AUTONEST VCOUTPUT · REVIEW

How to read a strength calculation report in 3 minutes

A dense strength report — look at just three places: design conditions · per-part thickness and judgment · what decided that thickness. A 3-minute reading guide for the reviewers and buyers who don't do the calculation themselves.

2026-08-17
AUTONEST VCFIELD · ORDERING

Design is done, so why can't you order? — automating the drawing and BOM too

Once the thickness is out it feels like design is done, but ordering is still far off. The chain from thickness to nesting, weld map, inspection quantity and material list (BOM), the time and mismatches that copying by hand creates — and what changes when the drawing and BOM come from the same design.

2026-08-12
AUTONEST VCFIELD · BOTTLENECK

Why a pressure-vessel quote always takes days — and how those days become weeks

The calculation is done in 30 minutes, yet the quote takes days — and when those days collide with other work, they become weeks. What eats the time isn't the calculation but what comes after it: drawing, material take-off, waiting for review, and the stretches where the job sat behind someone else's schedule. A look at what the ordering bottleneck really is.

2026-08-12

All posts

Scan by title — the search and filters above apply here too.