AUTONEST VCAbout · Pricing

Why an annual fee instead of a one-time purchase? — Before you compare prices with other software

2026-10-04 · 7 min read

"It's software — why is there a yearly fee instead of a one-time purchase?" We hear this a lot. There is one answer: updates.

A program like this is never "finished"

AUTONEST VC calculates thicknesses to the standard and to how you work, then produces drawings and material lists. But the field never stands still. Standards get revised, each company brings its own "this is how we do it", and reports from the people using it keep showing what needs fixing.

Above all, the parts that change are the ones nobody can foresee today. If we knew in advance what would change, we could build it in from day one — but real work always moves in unexpected places. Someone has to keep adjusting the program each time for it to stay useful.

A one-time price can't pay for ongoing care

If the model were "sell once and done", every fix after the sale would be pure cost. Maintenance slows down, and sooner or later it stops. The annual fee is what makes it possible to keep fixing and adapting.

A program without updates is a dead program

Look at the wider software market: many products simply stop getting updates after a certain point. The program still opens, but it can't follow revised standards, new versions of Windows or CAD, or new requirements. It becomes a program that opens but can't be used on the job.

A general-purpose CAD tool draws the same line even after years without updates. A calculation program that carries standards and shop practice is different. If the standard changes and the calculation doesn't, its results can no longer be trusted.

"Other software is cheaper" — how is a software price set?

Talk about an annual fee and the next question usually follows: "Mass-market software is cheaper, isn't it?" A fair question. But before putting the two prices on the same line, it helps to look at how software prices are set.

Making one more copy of software costs almost nothing. The cost is in building it in the first place, and then in fixing and verifying it continuously — exactly the maintenance described above. So the price ends up being decided by how many buyers share that cost.

Development · verification · maintenance cost  ÷  number of buyers  =  each buyer's share

Software sold in large volume worldwide spreads that cost across a very large number of buyers. Pressure vessel fabricators who must submit calculation reports to a national standard are, compared with the global market, a market orders of magnitude smaller. The same cost has to be shared by far fewer buyers.

The price gap is not a gap in output quality — it is a gap in market size.

Isn't this something vessel fabricators already know?

Nobody puts a mass-produced standard water tank on the same line as a pressure vessel designed to site conditions, inspected and delivered. When a fabricator hears "tanks are cheaper online, why is your quote like this?", they know what is different: the material, the basis for the thickness, the inspection, and the design time that went into that one vessel.

Software is the same. General-purpose software sold in volume and a program built for one field and one country's shop practice are not the same thing.

What exactly are you buying — general-purpose software vs AUTONEST VC?

General-purpose software sold worldwideAUTONEST VC
Calculation basisMainly foreign codesKorean standard: MCEE Notice No. 2025-61 (Korea)
What comes outCalculation resultsCalculation report for permit review · drawings (DXF) · purchase list (BOM) · plate cutting layout
Local shop practiceYou adapt it yourselfMill plate sizes · plate thicknesses · forming reduction · drawing format built in
What comes afterReport format, drawings, ordering redone by handAll follow from one input

This is not saying general-purpose software is bad. It is built for a wide market, so the last few steps for a local shop are left to the user. And those last few steps are exactly where most of the time goes: rewriting the report into the local format, drawing, fitting mill plates and building the order sheet. That time is not on any price tag, but it is paid every single time.

What about custom development for one company?

There is the other extreme. If one company had a program like this built just for itself, it would carry both the build cost and all later maintenance alone. Tailoring the whole design chain — strength calculation report, drawings, purchase list, cutting layout — to one company makes that burden far larger. It is not overcharging; building it alone simply costs that much.

AUTONEST VC sits in between. It is a finished product whose development and maintenance are shared by many fabricators in the same field, so the burden is far lighter than custom development, and it sits in a different place from mass-market products. And because it is annual, those shared contributions keep flowing into ongoing fixes.

So what should you compare it with?

Not another program's price tag, but the time it takes a person to do the same work today. Matching the calculation report, drawings and ordering data for one tank goes from hours to minutes. Even a few tanks a month add up to a lot of saved hours, and one more quote sent out in that time is revenue.

That's why maintenance is everything

What AUTONEST VC promises is not today's feature list but keeping up: reflecting changed standards, fixing what users report and shipping it, and building in the way you work, one piece at a time. The annual fee is the price of that promise.

Frequently asked questions

Q. It's software — why is there a yearly fee instead of a one-time purchase?
Because of updates. Standards get revised, each company brings its own way of working, and user reports keep showing what needs fixing. The annual fee is what makes it possible to keep doing that work.

Q. How often are updates released?
Updates still go out almost every week, and the installed program picks them up on its own.

Q. Mass-market software is cheaper — why is the price different?
Software prices are set not by output quality but by how many buyers share the cost of development, verification and maintenance. Pressure vessel fabricators who must submit reports to a national standard are a market orders of magnitude smaller than the global market, so far fewer buyers share the same cost.

Q. How is AUTONEST VC different from general-purpose software?
AUTONEST VC calculates to the “Standard for Inspection and Inspection Exemption of Heat-Using Equipment” (unofficial English translation; MCEE Notice No. 2025-61, Korea, partially amended 18 Dec 2025), and one input produces the calculation report for permit review, drawings (DXF), the purchase list (BOM) and the plate cutting layout. It also builds in local shop practice such as mill plate sizes, plate thicknesses, forming reduction and drawing format.

Q. What should I compare the price with?
Rather than another program's price tag, compare it with the time a person spends on the same work today. The hours spent matching a tank's report, drawings and ordering data come down to minutes. The most accurate way is to measure your current method side by side with a free trial.


A program you buy once eventually stops. Only software that keeps being maintained stays alive in the field.

Related — Nobody wants an update when they're busy

A program we keep fixing every week.
See it on real screens first. Watch the guide videos →