The install finished, you type VC in the CAD command line, and nothing happens — that was the scene we heard about most in AUTONEST VC support.
Not the calculation, not the drawing — people got stuck at the CAD registration step before them.
After matching CAD after CAD, version after version, we made a call and moved off it. Today AUTONEST VC has nothing to register in the CAD.
The calculation needs no CAD — only Excel installed on the PC (the report is built in Excel). The drawing is a DXF, so open and edit it in the CAD you already use.
The earlier AUTONEST VC ran inside the CAD as a LISP program, so the CAD had to be told once to load it at startup. That registration differed a little between CAD programs, and even between versions of the same program.
The tricky part was that a mismatch rarely gave a clear error. It just did not appear, so finding the cause took time while the customer waited.
We tested a lot. We installed several CAD programs widely used on site, in every version we could get, and ran installation, registration and drawing output on each.
But the CADs used in the field are far wider than that: companies still on versions from years ago, regional and education editions, company-specific security settings and add-ons. There will always be versions and setups we simply cannot get — and problems there cannot be caught in advance, however much testing is added.
So the answer was not "test even more" but "a structure that does not depend on the CAD version".
There was one answer — VC has to create the DXF file itself. DXF is the common drawing format every CAD opens, so building on it removes the CAD brand and version problem altogether.
Designers still open and edit drawings in their CAD. What changed is the place where the program leaned on the CAD — the part where VC was registered and run inside it.
If something still blocks you, tell us via [Account] → Report a bug / suggestion at the top right of the app, or by e-mail (autonestk@gmail.com). We fix it so the next person doesn't get stuck there.
Yes. The free tools were built this way from the start — they run in the browser with no install and no registration.
Same root. A DWG saved in a newer version will not open in an older program, and if the other side uses a different CAD, their native file will not open. So on site you end up asking for a common format again. Asking precisely saves a round trip:
How to open received files without installing anything is in How to open a STEP file without CAD.
Q. Do I type VC in the CAD command line?
No. AUTONEST VC does not register in the CAD. Open AUTONEST VC from the desktop, fill in the tabs and press [Calculate] — you get the report (Excel) and the drawing (DXF).
Q. Which CAD does AUTONEST VC work with?
The calculation needs no CAD. The drawing comes out as DXF, so any CAD that opens DXF can open and edit it, and on a PC without CAD you can view it in the free file viewer. Excel must be installed, because the report is built in Excel.
Q. So I don't need CAD any more?
Editing and plotting drawings still happens in your CAD. VC makes the drawing as a standard file (DXF), and the CAD opens it.
Q. What if [Open drawing] does not open the drawing?
A program that opens DXF (your CAD or a drawing viewer) has to be associated with DXF on that PC. You can also open the file directly with [Open folder], or drag it into the free file viewer.
Q. Is there a free tool I can use right now without CAD?
Yes. The free pipe ISO builder and the all-in-one 3D, drawing and PDF viewer run in the browser with nothing to install. The ISO tool exports DXF and 3D STEP; the viewer opens STEP, IGES, STL, GLB, OBJ, DXF, DWG and PDF.
Related — How to open a STEP file without CAD — and DWG too: open, measure, edit and co-view by link, no install · Korea Energy Agency pressure vessel inspection documents — report, drawing and weld map in one run