AUTONESTABOUT · THE NAME

Why AUTONEST — the reason we brought drawing and calculation into one nest

2026-09-10 · 7-min read

A short word about the name. AUTONEST AUTO is automatic, NEST is a nest, and the VC that follows stands for Vessel Calculation. So why a nest?

Design work is scattered

Finishing one pressure vessel has always been spread across places. The strength calculation happens in one tool, the drawing in CAD, the material list is retyped by hand, and the ordering data is built somewhere else again. It scatters once more at every handover, and when a single condition changes the whole chain restarts.

Most of the time goes into chasing the scattered pieces. The work that actually needs judgement gets pushed back.

Strength calculationDrawingBOMOrdering dataOne nestfrom one input, automatically
What used to be scattered gathers into one nest

Why did drawing and calculation run separately?

There is one screen for drawing and another for calculating thickness. The drawing sets the shape and dimensions; the report gives the thickness that shape needs to hold. The problem is that the two are different programs, on different screens. When the shape changes, a person reopens the report and copies the numbers across; when the result changes, they go back to the drawing and fix it.

Do this long enough and you assume that's just how it is. So did we. Then at some point, it stopped looking natural.

Where did AUTONEST VC begin?

We had been working on drawing automation for a long time — getting a program to draw repeated shapes (heads, for example). Along the way, something odd came into view. The number needed to decide the shape (the thickness) was already sitting in another file, yet instead of the program fetching it, a person was typing it in by hand. Both programs ran on the same computer, and they weren't talking to each other.

Getting a thickness, and having that thickness turn into a drawing, a material list and then an order, were entirely different things. A person was simply filling the gap by hand, every time.

What was needed was not a more accurate calculation, but a path from the end of the calculation to the drawing and the order. That path wasn't impossible; nobody had laid it yet.

A change in shape reruns the calculation, the finished calculation redraws the drawing with that thickness, and the result becomes the material list and ordering data straight away — removing the one step where a person copies numbers across. AUTONEST VC started there. That joined-up place is what the name calls the nest.

NEST — gathered into one place

What we did was put the scattered pieces in one place. From a single input, the strength calculation, the drawing, the material list and the ordering data come out together, in the same place. Change one and the rest follow. Less retyping, and less drifting apart.

AUTO — by machine, not by hand

That gathering is done by the program instead of a person repeating it each time. What used to take hours finishes in minutes. It means the hand that builds the nest is automatic.

VC — Vessel Calculation

The VC after the product name stands for Vessel Calculation. Vessel as in pressure vessel, Calculation as in the maths — literally that — the VC in the program name AUTONEST VC.

If AUTONEST is the roof, VC is the first nest under it. Pressure vessels came first, so the name followed; as other subjects are added, other names take that place. The roof stays, the nests grow.

The logo says the same thing

The hexagon is a honeycomb — a nest. Inside it the lines run unbroken and form an A and an N. AUTO and NEST are not two separate things; they are one piece.

The top face of the cube carries the product name, VC. As nests are added, only the letters on the top face change — the relationship between the roof and the nests, drawn out.

So the nest is a warm place

When you no longer have to chase scattered pieces, you can spend that time inside the nest on judgement rather than repetition — reading ambiguous conditions, watching quality, dealing with customers. The work only a person can do.

Easier does not mean lazier. It means spending your energy in the right place.

A nest is somewhere you come back to. The place where work that scattered outward gathers again. That is the one thing we are trying to build — a nest that is built automatically, and worth returning to.

Frequently asked questions

Q. What does the name AUTONEST mean?
AUTO means automatic and NEST means nest. It means gathering scattered design work — the strength calculation, drawing, material list and ordering data — into one place, automatically.

Q. What does VC in AUTONEST VC stand for?
Vessel Calculation — the VC in the program name AUTONEST VC.

Q. How are AUTONEST and AUTONEST VC different?
AUTONEST is the roof, and VC is the first nest under it. Pressure vessels came first, so it is VC; as other subjects are added, other names take that place.

Q. Why was AUTONEST VC made?
Because the drawing screen and the thickness calculation ran separately, and a person filled the gap by copying numbers across. It started from removing that one step, so that a change in shape reruns the calculation and the drawing and material list follow when it finishes.

Q. What does the hexagon in the logo mean?
The hexagon is a honeycomb, a nest. Inside it the lines run unbroken to form an A and an N, and the top face of the cube carries the product name, VC.


There is no grand meaning in the name. Gather the scattered pieces into one place, and do it automatically. A NEST built by AUTO, and its first nest is VC (Vessel Calculation) — that is all of it.

Related — Design is done, so why can't you order? — automating the drawing and BOM too

Scattered design work, into one nest.
See how calculation, drawing and ordering data come together from a single input. Watch the guide videos →