In a pressure-vessel calculation, a material enters as two pieces of data — the allowable stress by temperature and the external-pressure B-curve. AUTONEST VC treats these as data rather than hard-coding them into the program. So adding a material is not rebuilding the program; it is adding data.
Currently we support A240-304 and A240-316L, two stainless materials. We started with the materials our customers actually use most — for jacketed reactors and storage vessels. You can also assign different materials to the inner shell and the jacket (for example, 316L inner and 304 jacket).
Each material is defined by two sets of data:
The calculation engine reads this data and runs. So adding a material is not reworking the logic; it is entering that material's allowable-stress table and B-curve as data. Because the structure works this way, adding a material is not tied to any particular material.
So "only two today" is less a limitation than an honest statement of scope. The materials we support are backed all the way down — by scanned charts and verified allowable stresses — and the ones we don't support, we don't claim to.
That said, we don't add a material on a single request. Each material takes real work — scanning the external-pressure chart, verifying allowable stresses — so we prioritize the materials whose demand is clearly confirmed across multiple customers. Carbon steel and other stainless grades that are genuinely used often are the candidates. Not "every material works today," and not "ask and it's in" — but growing one material at a time, with a solid basis, toward the materials there is real demand for.
Need a material we don't list yet? We're collecting requests — once demand for the same material builds up, we add it as a priority. Leave the material name via [Account] → Report a bug / suggestion… at the top right of AUTONEST VC, or email us.