AUTONEST VCRESPONSE · TRUST

When a result looks wrong, here's how we respond

2026-09-07 · 4-min read

Every piece of software has bugs. What sets a tool apart is not a promise of "no bugs" but how fast and how precisely a problem is caught when it appears. AUTONEST VC is built and maintained by someone who has worked pressure-vessel design and ordering firsthand, so the response doesn't pass through a middleman. Here is what to do when you hit an odd value.

Odd value spotted Bug report from [Account] Calc data attach (Yes) Check · fix the maker, direct Auto update applied when the app starts
From report to fix — a response loop with no middleman

1. The outputs are interlocked

The calculation report, the drawing, the material list, and the weld map all come out of one engine with the same values. So a mismatch is itself a signal. If a shell length looks different between the drawing and the report, if an old number lingers in a table, or if text runs outside its cell — don't ignore it, let us know. The dimensions that actually get built are in the drawing and the material list (BOM); most such issues are on the display side (layout/labels), but anything that looks off is exactly the point to fix.

Not long ago an old example number lingered in the jacket-length cell of the report and looked different from the drawing. The drawing was correct; only the report's display was an old value. It was reported, fixed the same day, and shipped via auto-update. That is how we handle problems.

2. Report right inside the app — [Account] → Report a bug / suggestion

You don't need to write a separate e-mail. The reporting channel is inside the program. At the top right of AUTONEST VC, click [Account] → Report a bug / suggestion. It takes three steps.

  1. Describe the symptom or what you would like — what you were doing and what looked wrong. (If it's the report, which sheet and cell; if it's the drawing, which dimension — that's fastest.)
  2. Reply email — leave it blank and the reply goes to your sign-in email.
  3. Keep "Also send the last calculation conditions and run log" ticked and press [Send] — the inputs of the case you just ran (capacity, pressure, temperature, thickness and so on) go along so we can reproduce it faster. The drawing and Excel files are not sent. Untick it and only your message and the version go.

If a calculation fails partway, a [Send diagnostics] button appears on screen. It sends the error type and — only if you agree — the calculation conditions, the same way. You can also e-mail autonestk@gmail.com with a screenshot.

Why receive it inside the app? An e-mail easily leaves out "which version, which type, run how." The in-app report carries the minimum reproduction info — version, last calculation type — along with it, so the same screen is reproduced far faster.

3. The fix comes back automatically

A confirmed problem is fixed and released, and when you open AUTONEST VC the latest build is downloaded automatically. No separate reinstall needed, and the values you changed in Data settings and your inputs stay as they are. News is always available under [Help] → Notices. Display and consistency issues usually come back quickly.

4. Quick workarounds when you're in a hurry

5. When the program can't do it all — you get the original

To be honest, no program handles 100% of cases automatically. A special geometry outside the standard, or an uncommon fitting, may be beyond the automatic scope. That isn't a bug — it's a boundary.

Even then you aren't stuck. AUTONEST VC gives you the result as an editable original file, not a locked PDF — the report as Excel (.xlsx), the drawing as a DXF you can open and edit in any CAD. The special part the automation couldn't handle can be finished by the engineer right in the original. That's different from a black box you can neither open nor edit.

The automation handles most of it, and a person finishes the last special case in the original. Not insisting that "it all works" — that is this tool's boundary, and the reason someone who knows the floor built it.

I won't say there are no bugs. Instead, when one appears we catch it fast. And every result is checked, as a rule, by measuring it on the drawing to confirm they agree. That is how this tool builds trust.

Hit an odd value?
At the top right of AUTONEST VC, [Account] → Report a bug / suggestion — one line on the symptom, keep the conditions box ticked and press [Send]. That's all. Email autonestk@gmail.com works too.